11 11 Engine block
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Bearing cap to crankcase (ASA collar bolt) | S63O 0 | M11x102 | Replace screws. | |
| Jointing torque | 20 Nm | |||
| Angle of rotation | 100 ° | |||
| 2AZ Bearing cap to crankcase (ASA collar bolt 10.9) | S63O 0 | M8x70 | Replace screws. | |
| Jointing torque | 10 Nm | |||
| Angle of rotation | 55 ° | |||
| 3AZ Threaded support sleeves | S63O 0 | Jointing torque | 6 Nm | |
| 4AZ Angled screw connection to crankcase | S63O 0 | M8x37 | Flanged head screw 10.9 | 34 Nm |
| 5AZ Spacer bolt, oil pump | S63O 0 | M8 | 34 Nm | |
| 6AZ Screw plug, gutter strip | S63O 0 | M14x1.5 | Replace gasket. | 25 Nm |
| 7AZ Screw plug, main oil gallery rear and in V-space right | S63O 0 | M18x1.5 | Replace gasket. | 25 Nm |
| 8AZ Oil nozzle to crankcase | S63O 0 | M12x1 | 10 Nm | |
| 9AZ Special tool to crankcase | S63O 0 | M8x35 | 20 Nm | |
| 10AZ Special tool to crankcase | S63O 0 | M10x35 | 40 Nm | |
| 10AZ Special tool 11 8 930 to special tool 00 2 300 | S63O 0 | M14x35 | 160 Nm |