31 31 000 Removing And Installing Complete Left Or Right Spring Strut Shock Absorber

Installation note:

All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
Retaining elements on chassis and suspension and steering parts must be replaced.

Necessary preliminary tasks:

IMPORTANT: Risk of damage!
Secure spring strut against falling out.

Unscrew nuts (1).

Installation note:

Clean contact surface in spring strut dome.

Replace self-locking nuts.

Tightening torque 31 31 1AZ .

Fig 1: Self-Locking Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Version with Vertical Dynamics Management: Disconnect both plug connections (1).

Disconnect plug connection (2) on pulse sensor.

Disconnect plug connection (3) from brake lining sensor.

Fig 2: Plug Connection Of Pulse And Brake Lining Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Remove spring strut downwards out of wheel arch.

Fig 3: Spring Strut

Courtesy of BMW OF NORTH AMERICA, INC.