Button block for driving functions
The steering wheel contains a button block for the Dynamic Cruise Control (DCC) or Active Cruise Control (ACC) Stop&Go functions. The button block is located on the left-hand side of the steering wheel.
| Index | Explanation |
|---|---|
| 1 | Set button |
| 2 | Reduce distance button (ACC)* |
| 3 | Toggle switch |
| 4 | Increase distance button (ACC)* |
| 5 | Switching DCC/ACC to standby or switching off |
| 6 | Resume/call-up stored speed button |
* Buttons 2 and 4 are only present on vehicles with the option Active Cruise Control Stop&Go.
The SET button can be used to set the desired driving speed.
The toggle switch be moved upwards or downwards and is not designed as locking. Each time the toggle switch is operated, it returns to its home position. Each direction of the toggle switch has two stages. See table.
The l/0 button can be used to switch the Dynamic Cruise Control (DCC) and Active Cruise Control (ACC) Stop&Go function to standby or to switch it off.
| Position | Explanation |
|---|---|
| +2 | Increase driving speed in steps of 10 kph (6 mph) |
| +1 | Increase driving speed in steps of 1 kph (.5mph) |
| ± 0 | Toggle switch in home position |
| -1 | Reduce driving speed in steps of 1 kph (.5 mph) |
| -2 | Reduce driving speed in steps of |
Pressing the RES button (resume) calls up and activates the last stored driving speed value.