Installation note

Make sure guide (3) is correctly seated in frame (2).

Fig 1: Identifying Board On Frame And Guide

Courtesy of BMW OF NORTH AMERICA, INC.

If anti-theft alarm system is fitted, make sure USIS sensor lead (1) is correctly seated in retaining tabs (2) on frame (3).

Fig 1: Identifying USIS Sensor Lead And Retaining Tabs On Frame

Courtesy of BMW OF NORTH AMERICA, INC.

Clip light pressed screen (1) into light unit (2).

Installation note:

Make sure pin (3) is correctly seated on board (4).

Fig 2: Identifying Light Pressed Screen On Light Unit And Pins On Board

Courtesy of BMW OF NORTH AMERICA, INC.

Install bulbs (1) in light pressed screen (2).

Installation note:

Fig 3: Identifying Bulbs On Light Pressed Screen

Courtesy of BMW OF NORTH AMERICA, INC.

Screw down base (1) to roof switch cluster (2).

Fig 4: Identifying Roof Switch Cluster With Base

Courtesy of BMW OF NORTH AMERICA, INC.