86 10... Disassembly of left and right lamp housings

Cut through sealing compound (1) and remove.

Drill out rivet connections (2).

Installation: 

Use Sikaflex 221 as sealing compound.

Fig 1: Identifying Sealing Compound And Rivet Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Drill out rivet connections (1).

Raise side sections (2, 3).

Pull out lamp housing (4) towards inside in direction of platform.

Fig 2: Identifying Lamp Housing And Rivet Connections

Courtesy of BMW OF NORTH AMERICA, INC.