61 35 030 Removing and installing (replacing) power module

IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION) .

Necessary preliminary tasks:

Take off cover for control units (1).

NOTE: Make sure cover for control units (1) is correctly seated on locating pins (2).

Fig 1: Identifying Control Units And Locating Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1) and disconnect.

Remove power module (2) in direction of arrow from mounting for control units (3).

Fig 2: Removing Power Module

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: