32 00... Moving vehicle into normal position

Necessary preliminary tasks: 

• Check compliance with TEST CONDITIONS , bring vehicle to a stop if necessary.
• Version with air spring system: Carry out ride-height-calibration
• Check vehicle interior and luggage compartment (incl. luggage compartment recess) for load, unload vehicle if necessary
• Introduce DIN load (refer to TECHNICAL DATA ) into vehicle
• Determine VEHICLE RIDE HEIGHT
  NOTE: If the vehicle ride height is not inside the tolerance (refer to FRONT AXLE - RIDE HEIGHT E60 , FRONT AXLE - RIDE HEIGHT E60 LONG VERSION , REAR AXLE - RIDE HEIGHT E60 , REAR AXLE - RIDE HEIGHT E60 LONG VERSION ), the vehicle must be repaired (coil spring/leakage).