00 00 006 Vehicle test
WARNING: This page is about a different car, the 2013 BMW X5 M, 2012 BMW X5 M, 2011 BMW X5 M, and 2010 BMW X5 M. However, it is still accessible from the selected car via links, so may be relevant.
Connect diagnosis system to diagnostic socket.
Switch the ignition on.
Carry out vehicle identification.
Click on brief test.
The vehicle test is carried out.
NOTE:
For motor vehicle diagnosis, the brief test is essential for evaluating possible stored fault codes. In the vehicle test, the control units are physically identified in succession and their fault memories read out.
If the fault memory has been read out, the faults appear in the "Fault pattern selection" mask in the "Fault memory contents" field.
If the fault memory has been read out, the faults appear in the "Fault pattern selection" mask in the "Fault memory contents" field.