72 12... Deactivation of airbags
WARNING:
- The responsibility for (de-)activation rests with the customer.
The airbags should always be deactivated if the front passenger seat is fitted with a child seat.
- Customer consent must be documented.
The following airbags can be (de-)activated:
- Passenger airbag
- Side airbag (front passenger), front
- Side airbag (front passenger), rear
IMPORTANT:
Head airbag on passenger side remains active.
R50/R53 up to 04/2004 and E83 up to 09/2004 only:
For details of deactivation, see following work steps.
R50/R53 from 04/2004 and E83 from 09/2004 only:
see DEACTIVATING FRONT PASSENGER AIRBAG WITH KEY-OPERATED SWITCH .
Necessary preliminary tasks:
- Read and comply with safety regulations
- Disconnect battery . See 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
Passenger airbag
NOTE:
Seat occupancy detector remains connected.
- Expose plug connection of passenger airbag
- Disconnect plug connection
- Tie back disconnected cable and secure with cable strap (rattling noises)
- Stick on warning signs (see below)
- Code airbag control unit using BMW scan tool.
- Documentation of customer consent and storage in car's file
- Entry in car's documents (Germany only)
- Replacement of passenger belt with belt force limitation by version without belt force limitation
Side airbag, front
- Expose plug connection of side airbag
- Disconnect plug connection of corresponding side airbags
- Tie back disconnected cables and secure with cable strap (rattling noises)
- Stick on warning signs (see below)
- Code airbag control unit (see )
- Documentation of customer consent and work in car's file
- Entry in car's documents (Germany only)
Side airbag, rear
- Expose plug connection of side airbag
- Disconnect plug connection of corresponding side airbags
- Tie back disconnected cables and secure with cable strap (rattling noises)
- Stick on warning signs (see below)
- Code airbag control unit (via CIP)
- Documentation of customer consent and work in car's file
- Entry in car's documents (Germany only)
Warning sign, passenger airbag
- Stick on a warning sign (sourcing reference: BMW Parts Service - Component Group 01/Form BMW) with the text "Passenger airbag out of operation" from the inside to the top outer edge of the windshield on the passenger side.
NOTE:
Remove the warning sign when the passenger airbag is reactivated.
Warning signs, side airbag
- Stick on 2 warning signs to the B-pillars (front side airbag) or C-pillars (rear side airbag) to the nearest free space below the door lock.
NOTE:
Remove warning signs when reactivating side airbags.
Passenger Airbag Off light (US version only)
- Remove Airbag Off indicator (POL) or trim
- Disconnect plug from Airbag Off indicator
- Tie back plug and secure with cable strap (rattling noises)
- Install trim
- Code airbag control unit
Function check (except US version)
The function of the airbag system is checked when the ignition key is turned in the ignition switch.
WARNING LAMP LIGHTS CHART
| Warning lamp lights up: | Coding | ||
|---|---|---|---|
| before | after | ||
| 1. | Warning lamp lights up continuously if an airbag is deactivated | X | |
| 2. | Warning lamp goes out after several seconds when airbags are deactivated | X | |
| 3. | Warning lamp goes out after several seconds when airbags are activated | X | X |
NOTE:
A coding
of the airbag control unit must be carried out so that the warning lamp goes out again after deactivation.