86 21... Replacing inside light power cable

NOTE: Remove inside light cover and lamp housing,
refer to 86 21... REPLACING INSIDE LIGHT
Remove inside light plug,
refer to 86 21... REMOVING INSIDE LIGHT PLUG

Carefully remove adhesive bonds of power cable (1) from hood surface.

Installation:

Carefully remove traces of old adhesive with a scraper. Use standard heat gun adhesive as adhesive.

Fig 1: Identifying Power Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully remove adhesive bonds of power cable (1) from hood surface.

Installation:

Carefully remove traces of old adhesive with a scraper. Use standard heat gun adhesive as adhesive.

Fig 2: Identifying Power Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Remove flat connectors (1). Strip cable ends (2) and connect to a new cable. Feed cable connection through opening (3).

Fig 3: Identifying Flat Connectors, Strip Cable Ends And Feed Cable Connection Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Lay new power cable with old power cable through duct (1).

Fig 4: Identifying Power Cable Duct

Courtesy of BMW OF NORTH AMERICA, INC.