66 54 005 Removing And Installing/Replacing Control Unit For Night Vision System

Necessary preliminary tasks: 

• Disconnect negative battery cable. See 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
• Remove safety information module  . See 65 77 700 REMOVING AND INSTALLING (REPLACING) SAFETY INFORMATION MODULE .

Disconnect plug connection (1), press lug (2) downwards and remove control unit (3) from module carrier.

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out coding/programming  . See VEHICLE PROGRAMMING AND CODING .