86 21 ... Replacing inside light power cable

NOTE: Remove inside light cover and lamp housing, refer to 86 21 ... Replacing inside light .

Carefully remove adhesive bonds of power cable (1) from hood surface.

Installation:

Carefully remove traces of old adhesive with a scraper. Use standard heat gun adhesive as adhesive.

Fig 1: Power Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully remove adhesive bonds of power cable (1) from hood surface.

Installation:

Carefully remove traces of old adhesive with a scraper. Use standard heat gun adhesive as adhesive.

Fig 2: Power Cable

Courtesy of BMW OF NORTH AMERICA, INC.

Remove flat connectors (1). Strip cable ends (2) and connect to a new cable. Feed cable connection through opening (3).

Fig 3: Flat Connectors, Power Cable Ends And Opening

Courtesy of BMW OF NORTH AMERICA, INC.

Lay new power cable with old power cable through duct (1).

Fig 4: Duct

Courtesy of BMW OF NORTH AMERICA, INC.