61 31 006 Removing And Installing (Replacing) Fixture For Steering Column Stalk
WARNING:
Move wheels into straight-ahead position and do not alter this position during the repair work.
Necessary Preliminary Tasks:
- Move steering column into "lower" and "extended" position.
- Disconnect battery negative lead. Refer to 61 20 900 DISCONNECTING AND CONNECTING BATTERY NEGATIVE LEAD .
- Remove airbag unit. Refer to 32 34 020 REMOVING AND INSTALLING/REPLACING AIRBAG UNIT (BASIC STEERING WHEEL) and 32 34 030 REMOVING AND INSTALLING/REPLACING AIRBAG UNIT (SPORT STEERING WHEEL) .
- Remove steering wheel. Refer to 32 33 000 REMOVING AND INSTALLING/REPLACING STEERING WHEEL .
- Remove front section of steering column trim. Refer to 32 31 010 REMOVING AND INSTALLING/REPLACING FRONT SECTION OF STEERING COLUMN COVER .
- Remove lower section of steering column trim. Refer to 32 31 020 REMOVING AND INSTALLING/REPLACING LOWER SECTION OF STEERING COLUMN TRIM .
- Remove wood trim on instrument panel, middle. Refer to 51 45 363 REMOVING AND INSTALLING/REPLACING CENTER WOOD TRIM ON INSTRUMENT PANEL .
- Remove top section of steering column casing. Refer to 32 31 004 REMOVING AND INSTALLING/REPLACING UPPER SECTION OF STEERING COLUMN TRIM .
NOTE:
Comply notes and instructions on handling fibre optic cables. Refer to 61 00... NOTES ON HANDLING OPTICAL FIBERS .
Release screws (1).
Pull out fixture for steering column stalk (2) in direction of arrow.
Disconnect plug connections behind and remove fixture for steering column stalk (2).
Replacement:
NOTE:
Illustration shows fixture for steering column stalk installed.
Release screws (1).
Remove steering column control (2).
Replacement:
Carry out programming/coding. Refer to DIAGNOSIS PROGRAMMING/CODING .
Carry out adjustment of steering angle sensor. Refer to 61 31 996 Carry Out Steering Angle Sensor Adjustment .