61 71 015 Removing and Installing/Replacing a Jet Nozzle In Windshield Washer System
NOTE:
The jet nozzles of the windshield washer system are preset at the factory and cannot be readjusted.
Unfasten plug connection (1) and disconnect.
Unlock plug housing (2) and disconnect.
Detach connector (3) in direction of arrow from nozzle of windshield washer system (4).
Unlock nozzle of windshield washer system (4), press out through opening and remove.
Installation:
Make sure nozzle of windshield washer system (4) is correctly seated.
Ensure hose is laid without kinks.