LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> General Electrical System - Repair >> 31 Switch >> 61 31 006 Removing and Installing/Replacing Fixture For Steering Column Stalk (From 09/2005)

61 31 006 Removing and Installing/Replacing Fixture For Steering Column Stalk (From 09/2005)

WARNING: Move wheels into straight-ahead position and do not alter this position during the repair work.
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection)  . See 61 35 ... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) 

Necessary preliminary tasks: 

Disconnect plug connections from rear on fixture for steering column stalk (2).

Release screws (1).

Remove fixture for steering column switch (2) in direction of arrow.

Installation: 

Vehicles with active front steering from 03/07: 

Teach in center position for power steering gear 

Fig 1: Identifying Steering Column Stalk & Screws
G04761605Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Replacement: