LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2007 >> 525xi Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> General Electrical System - Repair >> Switch >> 61 31 195 Removing and installing (replacing) front controller (until 09/2008)

61 31 195 Removing and installing (replacing) front controller (until 09/2008)

IMPORTANT:

Risk of damage!

Before dismantling it is imperative to note whether the controller is installed with a version before or after 09/2008  !

NOTE: The number of buttons and shape of controller can vary depending on vehicle type.

Before 09/2008:  Controller (1) has buttons on bottom only  .

After 09/2008:  Controller (2) has buttons top and bottom  .

NOTE: These repair instructions describe the removal and installation (replacement) of controller (1)  !
Fig 1: Identifying Number Of Buttons And Shape Of Controller
G06855285Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT:

Risk of damage!

The button for the controller must not  be removed!

Necessary preliminary tasks: 

If necessary, disconnect plug connections.

Release screws (1).

Remove controller (2) in direction of arrow from storage compartment (3).

Fig 2: Identifying Storage Compartment, Controller And Screws
G04761634Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out VEHICLE PROGRAMMING/CODING .