11 11 Engine Block
TIGHTENING TORQUE SPECIFICATION - ENGINE BLOCK
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Main bearing bolts (steel bolts 10.9) | S85 | M11x115 | Threads cleaned and oiled
IMPORTANT:
Observe tightening specification.
|
|
| 1. Jointing torque | 30 Nm | |||
| 2. Angle of rotation | 130 ° | |||
| 1AZ New main bearing bolts (steel bolts 10.9) | S85 | M11x115 | Threads cleaned and oiled
IMPORTANT:
Observe tightening specification.
|
|
| 1. Jointing torque | 30 Nm | |||
| 2. Angle of rotation | 130 ° | |||
| 3. Release all main bearing bolts. | ||||
| 4. Jointing torque | 30 Nm | |||
| 5. Angle of rotation | 130 ° | |||
| 6. Release all main bearing bolts. | ||||
| 7. Jointing torque | 30 Nm | |||
| 8. Angle of rotation | 130 ° | |||
| 2AZ Fitting bolts (steel bolts 12.9) | S85 | M8x94 | Threads cleaned and oiled
IMPORTANT:
Observe tightening specification.
|
|
| Jointing torque | 15 Nm | |||
| Torque angle | 100 ° | |||
| 3AZ Main bearing bolts (steel bolts 10.9) | S85 | M8x65 | Threads cleaned and oiled | |
| Jointing torque | 5 Nm | |||
| Torque angle | 90 ° | |||
| 4AZ Main bearing bolts (steel bolts 10.9) | S85 | M8x40 | Threads cleaned and oiled | |
| Jointing torque | 5 Nm | |||
| Torque angle | 60 ° | |||
| 5AZ Main bearing bolts (steel bolts 8.8) | S85 | M6x25 | Threads cleaned and oiled | |
| Jointing torque | 15 Nm | |||
| 6AZ Screw plug to crankcase, front | S85 | M22x1.5 | Replace seal | 50 Nm |
| 7AZ Screw plug to crankcase, main oil gallery | S85 | M16x1.5 | Replace seal | 30 Nm |
| 8AZ Coolant drain plug to crankcase | S85 | M10x1 | Replace seal | 13 Nm |
| 9AZ Screw plug to crankcase, front | S85 | M14x1.5 | Replace seal | 15 Nm |