Slide/Tilt Sunroof: Initialization: Notes

Initialization of the slide/tilt sunroof involves the following procedures that are necessary to ensure complete operation of the slide/tilt sunroof:

• Normalizing

  The normalizing procedure involves finding the mechanical end position at the limit stop of the "tilt" position. This position is stored and is used to calculate the remaining end positions of the slide/tilt sunroof.

• Learning the characteristic

  The learning procedure registers the closing force necessary for each direction of the slide/tilt sunroof and stores this value.

Complete functionality of the slide/tilt sunroof can be guaranteed only by full initialization. The initialization procedure can be initiated with the button for the slide/tilt sunroof or via the diagnosis system.