61 31 313 Replacing a brake lining sensor

Necessary preliminary tasks:

Open plug housing (1).

Unclip lead of brake lining sensor (2) from plug housing (1).

Disconnect associated plug connection of lead from brake lining sensor (2).

Feed lead from brake lining sensor (2) out of fixtures.

Fig 1: Removing Brake Lining Sensor

Courtesy of BMW OF NORTH AMERICA, INC.

Press clip (1) together and detach brake lining sensor (2) in direction of arrow from brake caliper (3).

Installation:

Make sure clip (1) and brake lining sensor (2) are correctly seated in brake caliper (3).

Fig 2: Identifying Correct Seating Of Brake Lining Sensor

Courtesy of BMW OF NORTH AMERICA, INC.