Optical Testing & Programming System (OPPS )

Optical Testing and Programming System (OPPS) is a device that may be used instead of the diagnostic head as a vehicle interface for either DISplus or GT-1. When used, it replaces the diagnostic head. OPPS was developed to reduce the amount of time required to program E65/E66 MOST control modules by 30-60 percent and to diagnose fiber optic communication systems MOST and Byteflight. OPPS can be connected into the MOST bus and the OBD-II connector simultaneously.

OPPS comes with 2 OBD-II cables. A short version (663 111) is used for CIP programming through the OBD-II connector, and MOST bus as well as diagnosis of all E65/E66 modules. A long version (663 112) is used for optical module and bus testing of modules located a distance from vehicle OBD-II connector such as in vehicle trunk. Long OBD-II cable (663 112) only transmits at a baud rate of 10400 compared to the high speed 115K baud for 663 111.