86 10 ... Disassembly of front apron

Drill out rivets (1) on lower apron edge.

Fig 1: Drilling Out Rivets On Lower Apron Edge

Courtesy of BMW OF NORTH AMERICA, INC.

Remove sealing compound (1).

Fig 2: Removing Sealing Compound And Drilling Out Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Drill out rivets (2).

Installation: 

Use Sikaflex 221 as sealing compound.

Press side sections (1) to side in direction of arrow. Tilt center section (2) downwards and remove to side.

Fig 3: Removing Sections

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Use Sikaflex 221 as sealing compound.