One-Touch Windows Inoperative After General Module Replacement (61 07 09)

Publication date: 2009-04-01
Reference number: 61 07 09

ONE-TOUCH WINDOWS INOPERATIVE AFTER GENERAL MODULE REPLACEMENT

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI B61 07 09, Date of Issue: April 2009

BMW:	E46 (3 Series); E60, E61 (5 Series); E63, E64 (6 Series); E53 (X5)
GROUP:	General Electrical Systems

SUBJECT

One-touch Windows Inoperative After General Module Replacement

SITUATION

After replacing the Body Module (KGM or GM, depending on model) and updating the vehicle software, the one-touch windows are inoperable.

CAUSE

The spare part body module used on this vehicle is different from what was originally installed in the vehicle. The spare part is a low version of the body module. All functions of the module remain unchanged, but the one-touch feature has a default setting of inactive.

CORRECTION

Change the setting for the window one-touch operation via the Car and Key Memory.

PROCEDURE

Start an ISTA/P session.
Select the "Vehicle" tab.
Select the "CKM" tab.
Select "Power windows" from the drop-down menu.
Set each of the one-touch window selections to Active.
Select the Measures Plan button.
Accept the Measures Plan and the update will take place.

WARRANTY INFORMATION

Covered under the terms of the BMW New Vehicle Limited Warranty or the Certified Pre-Owned Program.

WARRANTY INFORMATION

Defect Code:	61 38 09 14 00
Labor Operation:	Labor Allowance:	Description:
Refer to KSD*	Refer to KSD	Change CKM settings for one-touch windows.