System Faults and Reactions: Notes
SYSTEM FAULTS AND REACTIONS
| Malfunction | Fault response |
|---|---|
| CAN steering angle signal correction Deviation > 10° | Fixed current, fault in memory, gong at end of trip |
| Acceleration sensors (front, left, right, rear) | Fixed current output for front axle, rear axle Fault in memory, gong at end of trip |
| Wheel speed front left/right |
|
| External voltage supply fault fluctuation (nominal should be 5 V +/- 10%) | Fixed current output for front axle, rear axle Fault in memory, gong at end of trip |
| Voltage supply to EDC control module between 2 V and 8 V | Valves de-energized, fault in memory, gong During trip |
| Valve failure | Valves de-energized, fault in memory, gong during trip |
| Voltage wake up,<2V standing & wake up>7V | Valves de-energized, fault in memory, gong during trip |
| No vehicle speed via CAN Bus | Fixed current, fault in memory, gong at end of trip |
| Control module EEPROM faulty | Fixed current, fault in memory |
| Control module - no alive message from EDC-K | Valves de-energized, fault in memory, gong during trip |