LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2002 >> M3 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems >> Fuel System Pressure Release

Fuel System Pressure Release

Fuel system pressure release procedure not available from manufacturer. It may be possible to remove fuel pump relay, start engine, and run engine until fuel pressure drops (engine stalls). See DME & FUEL PUMP RELAY LOCATION  table.

DME & FUEL PUMP RELAY LOCATION (1)

Application Location
3-Series
Z3
DME Relay Right Rear Corner Of Engine Compartment, Next To DME PCM
Fuel Pump Relay Under Left Side Of Instrument Panel, Next To Kick Panel
E46
DME Relay Left Rear Corner Of Engine Compartment, In Relay/PCM Box
Fuel Pump Relay Behind Glove Box
5-Series & 7-Series
DME Relay Right Rear Corner Of Engine Compartment, Next To DME PCM
Fuel Pump Relay Right Side Of Trunk
(1) For relay location illustration, see RELAYS under RELAYS & SOLENOIDS in SYSTEM & COMPONENT TESTING article.