DSC MK60 Fault Code Descriptions (34 01 01)

DSC MK60 FAULT CODE DESCRIPTIONS

TECHNICAL SERVICE BULLETIN

SUBJECT

DSC MK60 Fault Code Descriptions

SITUATION

DIS CD24 fault code descriptions for DSC MK60 are in German.

CORRECTION

To help with troubleshooting, the English translation of MK60 Fault Codes follow:

1. 5D90 - Wheel speed sensor (front left) electrical failure
2. 5D91 - Wheel speed sensor (front left) plausibility at speed > 40km/h
3. 5D92 - Wheel speed sensor pulse wheel (front left) plausibility tooth fault every wheel revolution
4. 5D93 - Wheel speed sensor (front left) plausibility at speed < 20km/h
5. 5D94 - Wheel speed sensor (front left) plausibility during ABS regulation
6. 5DA0 - Wheel speed sensor (front right) electrical failure
7. 5DA1 - Wheel speed sensor (front right) plausibility at speed > 40km/h
8. 5DA2 - Wheel speed sensor pulse wheel (front right) plausibility tooth fault every wheel revolution
9. 5DA3 - Wheel speed sensor (front right) run-up plausibility detection
10. 5DA4 - Wheel speed sensor (front right) plausibility during ABS regulation
11. 5DB0 - Wheel speed sensor (rear left) electrical failure
12. 5DB1 - Wheel speed sensor (rear left) plausibility at speed > 40km/h
13. 5DB2 - Wheel speed sensor pulse wheel (rear left) plausibility tooth fault every wheel revolution
14. 5DB3 - Wheel speed sensor (rear left) plausibility at speed < 20km/h
15. 5DB4 - Wheel speed sensor (rear left) plausibility during ABS regulation
16. 5DC0 - Wheel speed sensor (rear right) electrical failure
17. 5DC1 - Wheel speed sensor (rear right) plausibility at speed > 40km/h
18. 5DC2 - Wheel speed sensor pulse wheel (rear right) plausibility - tooth fault every wheel revolution
19. 5DC3 - Wheel speed sensor (rear right) plausibility at speed < 20km/h
20. 5DC4 - Wheel speed sensor (rear right) plausibility during ABS regulation
21. 5DF0 - Pump unit
22. 5DF2 - Valve / ECU hardware failure
23. 5DF4 - Wiring supply voltage < 9 Volt
24. 5DF7 - Wiring supply voltage > 18 Volt
25. 5E00 - End of line test active
26. 5E01 - End of line test - Timeout
27. 5E02 - End of line test - Rotation rate sensor adjustment Error
28. 5E03 - End of line test - Rotation rate sensor Error
29. 5E04 - End of line test - Transverse acceleration sensor Error
30. 5E05 - End of line test - Transverse acceleration and rotation rate error
31. 5E06 - End of line test - Rotation rate sensor incorrectly mounted
32. 5E07 - End of line test - Transverse acceleration and rotation rate sensor incorrectly mounted
33. 5E08 - End of line test - Steering angle sensor error
34. 5E11 - Internal Error CAN controller
35. 5E14 - CAN Timeout DME/DDE
36. 5E15 - CAN Timeout EGS"
37. 5E16 - CAN Timeout instrument cluster
38. 5E18 - CAN DME/DDE data not plausible
39. 5E19 - CAN DME/DDE
40. 5E1A - CAN DME/DDE Signal Error
41. 5E1E - CAN Timeout LWS
42. 5E1F - LWS calibration VIN not initialized
43. 5E58 - ASC ECU receives LWS CAN data
44. 5E59 - Coding error
45. 5E5B - DSC push button pressed longer than 10 sec or Error
46. 5E5D - Brake fluid level switch error
47. 5E5E - Brake light switch error
48. 5E20 - Pressure Sensor 1 electrical failure
49. 5E21 - Pressure Sensor 2 electrical failure
50. 5E24 - Pressure Sensor 1/2 not plausible
51. 5E26 - Power supply sensors
52. 5E2F - Temperature Sensor
53. 5E30 - Transverse acceleration sensor electrical failure
54. 5E32 - Transverse acceleration sensor not plausible
55. 5E38 - Rotation rate sensor electrical failure
56. 5E3C - Rotation rate sensor not plausible
57. 5E40 - Steering angle sensor signal not plausible
58. 5E43 - Steering angle sensor internal
59. 5E4E - DSC Sensor Offset check
60. 5E4F - DSC continual valve operation
61. 0xXY - Unknown error location

WARRANTY INFORMATION

Information only.