Key Variant Error (04 12 06)
Publication date: 2006-05-01Reference number: 04 12 06
KEY VARIANT ERROR
TECHNICAL SERVICE BULLETIN
Reference Number(s): SI B 04 12 06, Date of Issue:
May 2006
Superceded Bulletin(s): S.I. B04 12 06, Date of Issue:
April 2006
| BMW: | E46 (3 Series) |
| GROUP: | Tools and Equipment |
NOTE:
This Service Information bulletin supersedes S.I. B04 12 06 dated April 2006.
SUBJECT
Key Variant Error
SITUATION
When using the Key Reader, the following error message appears: "Data cannot be shown: The current key data do not have a valid key variant. The SAM software cannot process this key. Contact DCS Help Desk."
CAUSE
During vehicle production, the key variant, which defines the format of the key, was not written into the memory of the immobilizer.
CORRECTION
Using DIS V43.0 or higher, perform test module B6135_00012 using the following steps:
- Function selection / Service Function / Body / Immobilizer / Write key variant.
- Follow the on-screen prompts to complete the test module.
- Reinsert the key in the key reader and data will now be displayed.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
Defect Code: Refer to KSD
Labor Operation: Refer to KSD
Labor Allowance: Refer to KSD