LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2000 >> Z8 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Monitor System REINITIALIZATION

Tire Pressure Monitor System REINITIALIZATION

CAUTION: When driving with snow chains or a space-saver spare tire, DO NOT initialize the system.
  1. Set the tire pressure of all wheels to specification.
  2. Turn ignition switch to ON position, with engine off.
  3. Press TPMS reset button until the red TPMS warning light illuminates for a few seconds. See Fig 1.
  4. Drive vehicle. Initialization is automatically completed during the drive, without additional feedback. This "learning" process lasts at least 10 minutes.
    5. Fig 1: Locating TPM System Reset Button
    G00251684Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals