65 90... Notes on handling navigation computers

All Model Series:

CAUTION: Risk of damage! The navigation computer must not be disconnected from the power supply while the LED on the computer remains lit (the LED goes out after approx. 1 minute).

NOTE: To ensure full operation of all the communications components, it is necessary in new cars to insert a Road Map CD in the navigation computer. This is absolutely essential as certain functions are disabled for distribution channels. These functions will only be available again after a Road Map CD has been inserted. The mode preset at the factory is automatically reset when this CD is inserted.

Software Installation:

The navigation software must be loaded with terminal 15 activated and the navigation system ready for operation.

Make sure there is a stable power supply. If necessary, connect a battery charger to the vehicle.

The charging operation must not be interrupted (terminal 15 remains activated).

When Replacing Navigation Computer:

From E65/66:

Carry out coding of navigation computer with aid of Diagnosis and Information System via "CIP".
To E65/66:
Carry out coding of navigation computer with aid of Diagnosis and Information System in path "1 Receding".