LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2000 >> 740i >> Repair and Diagnosis >> Steering >> Manual Steering >> Power Steering >> Testing >> Steering Pump Pressure

Steering Pump Pressure

  1. Attach Power Steering Pressure Tester (32-4-00) between steering gear and banjo bolt on steering gear. Shut gauge cut-off valve on pressure tester.
  2. Open in-line cut-off valve on pressure tester. Bleed system with engine idling. Close in-line cut-off valve on pressure tester for 10 seconds (maximum).
  3. Pressure should be 1595-1740 psi (112-122 kg/cm2 ). If pressure is not within limits, repair or replace pump.
scientia non olet · About LEMON Manuals