LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1997 >> 318is Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Knock Sensor >> Removal (4-Cylinder)

Removal (4-Cylinder)

  1. Remove engine cover. See Figure. Remove harness conduit from injector rail. Remove upper intake manifold. Remove harness cover from lower intake manifold.
  2. Mark knock sensor connectors for reassembly reference. Disconnect coolant hose to access knock sensors. Remove knock sensor(s) from engine.
scientia non olet · About LEMON Manuals