LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1995 >> 325is Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Body >> Removal & Installation

Removal & Installation

  1. Remove mass airflow sensor. See MASS AIRFLOW SENSOR . Disconnect accelerator and cruise control cables from throttle body.
  2. Loosen hose clamps and remove hoses attached to bottom of throttle body. Disconnect throttle position switch connector. Remove 4 bolts, throttle body and gasket. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals