LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1995 >> 325is Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engines >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

  1. To install, reverse removal procedure. Ensure serpentine belt is correctly routed and properly seated in grooves. Turn 32-mm Wrench (11-5-040) counterclockwise, and tighten cooling fan nut to 22 ft. lbs. (30 N.m).
    NOTE: Tighten cooling fan nut to 29 ft. lbs. (40 N.m) if using a conventional 32-mm open end wrench.
  2. Fill and bleed cooling system. To do so, turn ignition on. Place A/C-heater controls on HEAT position to ensure heater valve is open. Add coolant to expansion tank. Run engine at 2500 RPM and add coolant to expansion tank as level drops.
scientia non olet · About LEMON Manuals