LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1995 >> 318is Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Mass Airflow Sensor >> Removal & Installation

Removal & Installation

  1. Remove airflow sensor assembly connector. Loosen throttle body air intake duct hose clamps and nuts, and remove hoses.
  2. Cut off strap on hose going to air cleaner and remove air cleaner assembly. Open 4 fasteners, remove screw and separate airflow sensor assembly sections. Remove 4 nuts and airflow sensor assembly.
  3. To install, reverse removal procedure. Check rubber mounts, dampers and airflow sensor assembly for proper seating. Check idle speed and CO level.
scientia non olet · About LEMON Manuals