LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1994 >> 740iL >> Repair and Diagnosis >> Steering >> Power Steering >> Power Recirculating Ball >> Testing >> Steering Gear Pressure

Steering Gear Pressure

NOTE: Perform STEERING PUMP PRESSURE  test before performing STEERING GEAR PRESSURE test.
  1. Raise and support vehicle. Install Power Steering Pressure Tester (32-4-000 ) between pump and flow control regulator. Bleed system. Using a piece of wood, limit steering from reaching full lock position by 1/2-3/4 turn.
  2. With engine running, pull steering wheel left against wood using 22 lbs. (10 kg) force for 5 seconds (maximum). Read steering gear pressure. Check pressure with steering wheel pulled toward right. If pressure is less than measured pump pressure, replace steering gear.
scientia non olet · About LEMON Manuals