LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1994 >> 525i Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Disc) >> Overhaul >> Brake Caliper >> Disassembly

Brake Caliper: Disassembly

WARNING: This page is about a different car, the 1994 BMW 525iT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove caliper. Remove pads from caliper. Remove caliper piston retaining ring (if equipped) and dust boot. Insert wooden block in caliper cavity.
  2. While keeping fingers clear of piston bore, slowly apply air pressure to fluid inlet of caliper to force out piston. Carefully remove piston seal without damaging caliper bore.
scientia non olet · About LEMON Manuals