LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1994 >> 325is Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 2.5L 6-CYL >> Fuel System >> Mass Airflow Sensor >> Removal & Installation

Removal & Installation

  1. Turn coupling and disconnect air mass sensor connector. Loosen hose clamp and pull off bellows.
  2. Loosen screws or open fasteners at air cleaner assembly. Remove air mass sensor and bellows. To install, reverse removal procedure. Ensure air mass sensor grille is not damaged during installation.
scientia non olet · About LEMON Manuals