LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1994 >> 318is Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 1.8L 4-CYL >> Fuel System >> Mass Airflow Sensor >> Removal & Installation

Removal & Installation

  1. Remove airflow meter assembly connector. Loosen throttle body air intake duct hose clamps and nuts, and remove hoses.
  2. Cut off strap on hose going to air cleaner and remove air cleaner assembly. Open 4 fasteners, remove screw and separate airflow meter assembly sections. Remove 4 nuts and airflow meter assembly.
  3. To install, reverse removal procedure. Check rubber mounts, dampers and airflow meter assembly for proper seating. Check idle speed and CO level.
scientia non olet · About LEMON Manuals