LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1992 >> 735i >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engines >> Removal & Installation >> Engine >> Installation

Removal & Installation: Engine: Installation

  1. To install, reverse removal procedure. Bleed cooling system. To bleed cooling system, add coolant to expansion tank and fill to level mark. Place A/C-heater control on WARM setting to ensure heater valve is open.
  2. Start engine, and run it at fast idle speed. Open bleed screw on thermostat housing and continue to add coolant to expansion tank as coolant level drops. Tighten bleed screw as soon as coolant is free of air bubbles.
scientia non olet · About LEMON Manuals