LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1992 >> 325is Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> FUEL PUMP (525i)

FUEL PUMP (525i)

  1. Siphon out as much fuel as possible from fuel tank, as fuel pump is secured to bottom of tank. Store fuel in approved gasoline container. Remove trunk trim panels. Remove 5 screws and fuel pump access cover.
  2. Mark evaporative system/fuel hoses for installation reference and remove hoses. Pull connector slide to one side and disconnect fuel pump connector. Remove 8 screws, seal, and fuel gauge sending unit.
  3. Compress safety clips and remove fuel pump from above. If necessary, remove pressure damper, check valve and fuel filter screen. Pull off pump holder. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals