LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1991 >> 735i >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Air Bag Restraint System) >> Diagnosis & Testing >> SRS Control Unit Terminal Identification

SRS Control Unit Terminal Identification

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1993 BMW M5, 1993 BMW 740iL, 1993 BMW 740i, 1993 BMW 535i, and 1993 BMW 525iT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: SRS control unit terminal identification information for 500, and 700 series is not available from manufacturer.
SRS CONTROL UNIT 20-PIN ORANGE HARNESS CONNECTOR TERMINAL ID (300 SERIES) (1)(2)

Terminal Color Description
1 Brown/Green Not Used In U.S.
2 N/A Not Used
3 Red/White To Left Front Crash Sensor
4 Brown/Green To Contact Ring/Air Bag
5 White/Blue To Right Front Crash Sensor
6 Red/White To Left Front Crash Sensor
7 Red/Blue To Right Front Crash Sensor
8 Black Not Used In U.S.
9 Blue/Green Not Used In U.S.
10 Blue Not Used In U.S.
11 White/Violet Diagnostic Bus Line
12 Blue/Green To Contact Ring/Air Bag
13 N/A Not Used
14 Yellow/Blue To Right Front Crash Sensor
15 Green Not Used In U.S.
16 Black/Yellow Start Signal From Ignition Switch
17 White To Left Front Crash Sensor
18 Violet/Green Ignition Voltage From Ignition Switch
19 White/Yellow Diagnostic Bus Line
20 Blue/Black Internal Ground For Air Bag Warning Light
(1) SRS control unit Orange 20-pin harness connector is connected directly into SRS control unit housing.
(2) SRS control unit terminal identification information for 500, and 700 series is not available from manufacturer.