LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1987 >> 535is Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engines >> Removal & Installation >> Engine >> Removal

Removal & Installation: Engine: Removal

  1. Remove hood. Disconnect battery cables from battery. Remove transmission. Remove splash guard from under engine. Drain cooling system and remove radiator. Remove power steering pump (leaving hoses connected) and secure away from engine.
  2. Remove A/C compressor with hoses connected (If equipped). Secure away from engine. Remove accelerator cable. Remove cruise control cable from engine (if equipped).
  3. Label and disconnect all electrical and ignition wiring that might interfere with engine removal. Disconnect wiring harness in glove box and pull through hole in firewall.
  4. Label and disconnect all coolant, ventilation, fuel and vacuum hoses (or lines). Remove air cleaner with airflow sensor.
  5. Remove nuts from engine mounts. Ensure no wiring, hoses or lines are attached to engine. Attach lifting chain and hoist to engine. Carefully lift engine from vehicle.
scientia non olet · About LEMON Manuals