LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1987 >> 535is Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engines >> Overhaul >> Piston & Rod Assembly >> Installation

Piston & Rod Assembly: Installation

  1. Install rings on piston and space end gaps 120 degrees apart. Coat piston and cylinder walls with engine oil. Install ring compressor on piston.
  2. Install piston and rod assembly with arrow on piston head toward front of engine. Install rod bearings. Using new rod bolts and nuts, install and tighten rod caps.
scientia non olet · About LEMON Manuals