Hydraulic System Bleeding
Ensure that fluid reservoir is full and attach bleeder hose to bleed screw on slave cylinder. Submerge end of hose in partly filled container of brake fluid and pump clutch pedal about 10 times.
Hold pedal down on last stroke and loosen bleeder screw to allow air to escape. Close bleeder screw and repeat until air is bled from system.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Slave Cylinder-to-Clutch | ||
| Housing Bolts | 18-20 (24-27) | |
| Clutch-to-Flywheel Bolts | 16-17 (22-23) | |
| Clutch Housing-to-Engine Bolts | ||
| 8 mm Bolts | 18-20 (24-27) | |
| 10 mm Bolts | 35-38 (47-51) | |
| Cover-to-Clutch Housing Bolts | ||
| 6 mm Bolts | 6-7 (8-9) | |
| 8 mm Bolts | 18-20 (24-27) | |