LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 1979 >> 633CSi Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Tune-Up >> Tune-Up Procedures - 6-Cylinder >> Engine Compression

Engine Compression

Check compression pressure with battery fully charged, engine at normal operating temperature, throttle fully open, and engine at cranking speed.

NOTE: On 528i models, deactivate the fuel Injection system by pulling connection "1" at the coil prior to making compression test.
COMPRESSION SPECIFICATIONS

Application Pressure
Bavaria, 3.0 CS, 3.0 Si, 528i, 530i & 630CSi
  Good Above 156 psi (11 kg/cm2 )
  Normal 142-156 psi (10-11 kg/cm2 )
  Poor Below 142 psi (10 kg/cm2 )
633CSi & 733i
  Good Above 142 psi (10 kg/cm2 )
  Normal 121-142 psi (8.5-10 kg/cm2 )
  Poor Below 121 (8 kg/cm2 )