Hydraulic System Bleeding
Attach a suitable hydraulic system bleeder to master cylinder reservoir. Open bleeder screw on slave cylinder and allow system to expel air. Bleeding operation is complete when air bubbles are no longer seen in fluid container.
TIGHTENING SPECIFICATIONS
| Application | Ft. Lbs. (mkg) | ||
|---|---|---|---|
| Clutch-to-Flywheel | |||
| 3.0 | 15-18(2.1-2.5) | ||
| 530i | 23-26(3.2-3.6) | ||
| Clutch Housing-to-Engine | |||
| 8 mm Bolts | 22-24 (3.0-3.3) | ||
| 10 mm Bolts | 31-35(4.3-4.8) | ||
| Transmission-to-Clutch Housing | |||
| 3.0 | 34(4.7) | ||
| 530i | |||
| 8 mm Bolts | 16-17(2.2-2.3) | ||
| 10 mm Bolts | 34(4.7) | ||