Android Operating System Control Module -J1243-. REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2025 Audi SQ5 Sportback, 2025 Audi SQ5, 2025 Audi Q5 e, 2025 Audi Q5 Sportback, and 2025 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
The Android Operating System Control Module -J1243- is located in the glove compartment.
If the control module is replaced, the following procedure applies:
-- Connecting and switching on the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Body
- Electrical Equipment
- 01 - OBD-capable systems
- 005F - Information Electronics Control Module 1 - J794 (MIB 3)
- 005F - Information Electronics Control Module 1, functions
- 078E - Android Operating System Control Module - J1243 - replacing
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.