Control Module And Hydraulic Unit; Vehicle With Vacuum Brake Booster Is Shown
WARNING: This page is about a different car, the 2025 Audi SQ5 Sportback, 2025 Audi SQ5, 2025 Audi Q5 e, 2025 Audi Q5 Sportback, and 2025 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 25 Nm
- Mounting Bracket
- Spacer Sleeve
- Nut
- 8 Nm
- ABS Hydraulic Unit -N55-
- If the ABS Control Module -J104- is faulty, it can be replaced separately.
- If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.
- Brake Line
- From brake master cylinder to the hydraulic unit
- Do not change the bending shape.
- Replace a damaged or bent brake line
- 16 Nm
- Brake Line
- From brake master cylinder to the hydraulic unit
- Do not change the bending shape.
- Replace a damaged or bent brake line
- 16 Nm
- Brake Line
- To the brake caliper
- Do not change the bending shape.
- Replace a damaged or bent brake line
- 14 Nm
- ABS Control Module -J104-
- If the ABS Control Module -J104- is faulty, it can be replaced separately.
- If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.
- Refer to ABS Control Module -J104- / ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING .
- Can be replaced separately if faulty.
- Refer to CONTROL MODULE, SEPARATING FROM HYDRAULIC UNIT .
- Refer to CONTROL MODULE, INSTALLING ON HYDRAULIC UNIT
- Bolt
- Tighten in two steps alternating from side to side.
- 1. Step: 1 to 1.5 Nm (to position the seal)
- 2. Step: 2.5 Nm
- Rubber Bushing
- Quantity: 3