Window Guide, Removing And Installing: Installing
WARNING: This page is about a different car, the 2025 Audi SQ7 and 2025 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Engage the window guide -2- on the rear door flange -arrow A-.
-- Starting at the back push on the window guide on the door flange -C arrows- and then in the guide on the fixed front door window.
-- Remove the protective film from the adhesive tape -1- and apply the front window guide at the same time the lower raised section of the door panel must engage -arrow A-.
Installation continues in reverse order of removal.