Infotainment System Display Service Position
WARNING: This page is about a different car, the 2025 Audi SQ7 and 2025 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Bringing into Service Position
The Vehicle diagnostic tester is connected.
-- Select the Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Body
- Electrical Equipment
- 01 - OBD-capable systems
- 5F - Information Electronics Control Module 1 - J794 (MIB 2)
- 5F - Information electronics control module 1, functions
- 5F - Move the Display Pivot Mechanism into Service Position