Driver Assistance Systems Front Camera, Calibrating, Static Calibration (Stationary Calibration): Notes

Special tools and workshop equipment required 

• John Bean - Wheel Alignment Computer :VAS701001 
• :VAS 6331/1 
• :VAS 6430 
• :VAS 701 001/1 

Condition

• A dynamic calibration is recommended. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING, DYNAMIC CALIBRATION (CALIBRATION DRIVE) .

Calibrating the front camera is necessary:

Condition

• The installation position of the Driver Assistance Systems Front Camera -R242- in the vehicle has changed.
• Rear axle toe/camber was adjusted.

Condition

The calibration requirements must be met.

• Refer to CALIBRATION CONDITIONS